C-18LF low frequency transducer

C-18LF low frequency transducer

The Challenger Series II C-18LF has been designed to provide very high acoustic output from 40Hz to 120Hz. This 18 inch (476mm) diameter woofer has an optimized efficiency/bandwidth product that provided maximum efficiency with standard sound reinforcement frequency range requirements for subwoofer applications…

Description

The Challenger Series II C-18LF has been designed to provide very high acoustic output from 40Hz to 120Hz. This 18 inch (476mm) diameter woofer has an optimized efficiency/bandwidth product that provided maximum efficiency with standard sound reinforcement frequency range requirements for subwoofer applications. It is typical to band limit large format touring systems and permanent installation public address systems to prevent the input of damaging ultra low frequency material. Because this low frequency protection is generally set to the range of 40Hz the C-18LF has been optimized to provide maximum output in the typical operating range. The large diameter voice coil design features a 4 inch (101.6mm) voice coil diameter and large cross sectional area coil for maximum heat dissipation. The C-18LF alsofeatures an aluminum based edge wound voice coil construction. The C-18LF is a Ferrite magnetics based design that also features a rugged aluminum die cast chassis.The mechanical suspension system has been optimized for high linear displacement within the rated operating range and input power rating of the transducer. This high efficiency design will produce high impact bass performance and is well suited for touring sound applications and permanent installation systems where live music is the dominant input signal.

GENERAL SPECIFICATIONS

Nominal Impedance 8 Ω
Power 800 Watt (rms)
SPL 1W@1M average sensitivity 97 dB
Frequency Response 40Hz – 120Hz
Dimension Ø x H (cm) 47.6 x 22.3
Net Weight 13 kg (28.6 lbs)
Shipping Weight 15 kg (33 lbs)
Packing Dimension H x W x D (cm) 49.5 x 49.5 x 27.5 (2.4cu.ft)
19.5″ x 19.5″ x 10.8″

PHYSICAL SPECIFICATIONS

Magnet type Ferrite
Voice Coil Diameter 101.6 mm (4 inch)

THIELE/SMALL PARAMETERS

Resonance Frequency Fs 42 Hz
DC. Resistance Re 6.1 Ω
Coil Inductance Le 0.47 mH
Mechanical Q Factor Qms 8.98
Electrical Q Factor Qes 0.81
Total Q Factor Qts 0.75
BL Product BL 20.54 Tm
Effective Moving Mass Mms 210.42 g
Equivalent Cas Air-Load Vas 134.99 Liters
Effective Piston Area Sd 0.12 Sqm
Half-Space Efficiency Eff 1.24 %
Airgap Height Hag 10.0 mm
Voice Coil Height Hvc 20.0 mm
Voice Coil Overhang Xmax 5.0 mm

PDF ikona katalog sa podacima

You've just added this product to the cart: