This card can be installed into the input card slots.
2x COM
Programmable RS422/RS485/RS232 ports that are used to control the
devices that adopt RS422/RS485/RS232 protocol
− COM port pins are shown as below:
− Pin wirings are shown as below:
1x ETHERNET
− Control the device connected to this card.
− 10/100Mbps self-adaptive
− TCP/IP protocol and UDP/IP protocol supported
3x I/O
− Trigger the execution of the function requirements via programming.
− Input and output modes supported
− Pins 1, 2 and 3 can be set to either the input or output, and pin G is the
common grounding pin for pins 1, 2 and 3.
3x RELAY OUT
− Connect to the relay to control the power on and off the connected
device.
− Voltage: 30 VDC, current: 3A at maximum
− Six pins are divided into three groups, which can be connected or
disconnected via programming.
3x IR OUT
− Programmable infrared control supported
− Pins 1, 2 and 3 are used for infrared emission, and pin G is the common
grounding pin for pins 1, 2 and 3.
Weight: 400 g
Dimensions: 193 mm × 247.12 mm × 21.15 mm
Power consumption: 1.2 W
